The Perth metro area
As a homeowner, it is essential to maintain your garage door springs. Garage door springs are under a lot of tension and can be dangerous if not handled properly. This blog post will discuss the proper way to maintain your garage door springs and what to do if they break.
We will also provide some tips for prolonging the life of your garage door springs. Let’s get started!
What are garage door springs made of?
Garage door springs are usually made of either steel or aluminium. Steel springs tend to be more durable, but they are also more likely to rust over time. Aluminium springs are not as durable as steel, but they are less likely to rust.
The different types of garage door springs
The two main garage door springs are torsion springs and extension springs. Torsion springs are located above the door, while extension springs are located on either side of the door. Both types of springs work by providing balanced tension that helps lift and lower the door.
Garage torsion springs are typically made from steel, and they work by winding and unwinding as the door is opened and closed. It is located above the door, and cables from the bottom corners twist around a metal rod when the door is opened. Extension springs are usually made from rubber or nylon, and they work by stretching and contracting as the door is opened and closed.
Tilt springs are under much tension, so it’s essential to ensure they’re correctly installed and maintained.
How do we identify broken springs?
Identifying a broken spring on your garage door can be difficult, as they are often hidden behind the panels. However, if you notice that your door is not opening or closing as smoothly as usual, or if you hear a loud noise when operating the door, then there is a good chance that one of the springs has broken. There is an unnecessary strain on the electric opener leading to the damage.
Another tell-tale sign is if the door seems to be “hanging” on one side – this is usually due to a broken spring causing an imbalance. Both types of springs work by providing balanced tension that helps lift and lower the door.
Garage torsion springs are typically made from steel, and they work by winding and unwinding as the door is opened and closed. It is located above the door, and cables from the bottom corners twist around a metal rod when the door is opened. Extension springs are usually made from rubber or nylon, and they work by stretching and contracting as the door is opened and closed.
Tilt springs are under much tension, so it’s essential to ensure they’re correctly installed and maintained.
How do we identify broken springs?
Identifying a broken spring on your garage door can be difficult, as they are often hidden behind the panels.
However, if you notice that your door is not opening or closing as smoothly as usual, or if you hear a loud noise when operating the door, then there is a good chance that one of the springs has broken. There is an unnecessary strain on the electric opener leading to the damage.
Another tell-tale sign is if the door seems to be “hanging” on one side – this is usually due to a broken spring causing an imbalance.
Causes of garage door springs break?
Over time, garage door springs will break. The door will become very heavy and difficult to open when this happens. There are several reasons why springs may break, including:
Worn out springs
Over time, garage door springs will break. The door will become very heavy and difficult to open when this happens. There are several reasons why springs may break, including:
Rust
Springs can also break down due to rust. This is a common problem in areas with high humidity or where the spring is regularly exposed to moisture. A garage door motor becomes damaged due to rust.
Incorrect installation
If a spring is not installed correctly, it may not be able to support the weight of the door properly. This can cause it to break prematurely.
How do we identify broken springs?
Replacing a garage door spring can be a daunting task, but it’s definitely something that you can do yourself with the proper tools and knowledge.
Here are the steps you’ll need to take to replace your garage door spring:
First, you’ll need to release the tension on the old spring. This can be done by disconnecting the springs from the tracks or loosening the tension rods that hold the springs.
Once the tension is released, you’ll be able to remove the old spring easily. To install the new spring, simply reverse the steps above. Make sure to tighten everything back up once the new spring is in place so that it doesn’t come loose and cause any accidents.
And that’s it! With these simple steps, you’ll be able to replace your garage door spring in no time.
Common problems with garage door springs
If you have a garage door, you have springs, too. And if you have springs, there’s a good chance you’ll experience problems with them. after all, they’re under a lot of tension, and they’re subject to wear and tear.
One of the most common problems with garage door springs is breaking. This can be caused by many things, including age, rust, or even manufacturing defects.
Another common problem is that the springs become loose over time. This can cause the door to sag or even come off the tracks entirely.
If you’re experiencing problems with your garage door springs, don’t despair. There are many ways to fix them, and in most cases, you can do it yourself.
However, if the problem is severe or you’re not confident in your ability to fix it, it’s always best to call in a professional. Garage door spring repair is not something you want to try to do on your own!
How much should it cost to replace the spring on a garage door?
Replacing the spring on a garage door is not difficult, but it is essential to do it correctly to avoid serious injury or damaging the door.
That’s because it can be incredibly dangerous. The cost of replacement springs can vary depending on the size and type of spring you need.
For example, a small torsion spring might cost $20, while a larger one could cost $100. If you have a garage door with two springs, you will need to replace both of them simultaneously.
The total cost will depend on the type and size of the springs you need, typically between $200 and $400. Therefore, it is essential to consult with a professional to determine the best option for your needs.
How do I know what spring to get for my garage door?
As anyone who has ever been Wake up in the middle of the night by a loud noise knows, garage doors can be very noisy. When a roller door is opening or closing, the springs that help lift it are under a lot of tension.
As a result, they can make a lot of noise. If your garage door starts to sound louder than usual, it may be time to replace the springs.
The good news is that there are a few relatively easy ways to determine which springs you need.
First, take a look at the spring itself. If it is broken or damaged, it will need to be replaced. Second, check the tension on the spring. If it feels loose or looks like it has stretched out, it will also need to be replaced.
Finally, if your garage door isn’t opening or closing as smoothly as it used to, new springs may help to improve its performance. You can choose the proper garage door repairs at reasonable prices without further damage.
